Motorola Phone Model

HOME

MyGift.com > Cell Phone Accessories > Motorola > Motorola V180 / V186 > Faceplates > Motorola V180/V186 3-Set Faceplates Installation Guide

Motorola V180 Accessories

Chargers

Hands-Free

Cases & Holsters

Faceplates

Motorola V180 / V186 3-Set Faceplates Installation Guide

First of all, you need a T6 Torx screwdriver to remove and install the middle part of this 3-set faceplate! $3.50
	1. Lift the top of the original cell phone lens and pull it away from the cell phone. 2. You will see two screws under the lens. Remove them with the T6 Torx screwdriver.
	3. Unsnap the top section (yellow shaded) from the middle section.
	4. Install the MIDDLE section of new faceplate set over your cell phone.
	5. Put the lens in place at the top piece.
	6. Insert the top piece. Press along the sides of the lens so to make it into place. 7. Install the back piece. 3 set faceplate done!
	To make a 2 set faceplate, simply follow steps 1 & 2, and install the back piece.